6 Cuft Lo-Pot Classic Blast Machines

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 2443 Lo-Pot holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle. The Lo-Pot Blast Machines are designed for ease in abrasive loading.

Requirements for Operation:
These items are required but not included with this equipment:
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle.
Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation:
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting.
The blast machine contains abrasive and meters it into the compressed air stream.

Advantages:
Yard portable, industrial-quality blast machines manufactured to ASME code.
1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
Model 2443 Lo-Pot has a LPV abrasive metering valve.

Approvals and Certifications:
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.